Publications
by Dong Wei SHU
Refereed Journals
(2026
5 papers)
180
Co-Authors: Gang Wang; Lei Guo; Yue Ma; Xuelin Li; Youming Chen; Chuanting
Wang; Yuan He; Weitao Wu; Dongwei Shu. “Hydrodynamic ram from Zr55Cu30Al10Ni5
fragmentation: experiments, SPH/ALE simulations, and pressure normalization”
International Journal of Impact Engineering.Corresponding Author: Professor
Yong He
Volume 213, July
2026, article reference IE_105674
179
Zhigao Chen, Dongwei Shu, Fei Ding, Mingjun Chen, Bo Wang. A novel hybrid
machining approach for SiCp/Al composites: Insights into material removal
mechanisms and surface quality improvement. Ceramics International. online 26
November 2025. 2026, 52(1), pp. 693–710
178
Jian Jiang, Zhifang Zhang, Dongwei SHU, Jiyang Fu. A novel model for predicting
temperature-dependent frequency degradation and fatigue life of GFRP laminates
under cyclic tension. Thin-Walled Structures.Accepted Nov 20, 2025. Volume 219, Part B, February
2026, 114289
177
Chen, Z., Jin, Y., Gao, M., Shu, D., Ding, F., Chen, M., Wang, B., Optimization
of
multi-step
cutting strategies for SiCp/Al composites: A thermo-mechanical coupled
simulation and experimental study, Materials & Design 260 (2025), ;
Accepted 12 November 2025 Materials & Design 260 (2025) 115144 Available
online 13 November 2025 doi: https://doi.org/10.1016/j.matdes.2025.115144
176
Shuli Li, Guolai Yang, Liqun Wang, Dongwei Shu, Shuqing Xia.
“Cross-scale prediction of erosion damage to Cr-plated coating barrel under
high temperature and supersonic environments”. Tribology International 213
(2026) 111109
(2025
10 papers)
175
Yang, J., Liu, B., Shu, D., ... Huang, J., Tang, X. Influence
of High Injection Speed on Porosity and Mechanical Properties of High-Pressure
Die-Casting Al–Si–Mg–Mn Alloy. Metallurgical
and Materials Transactions B Process Metallurgy and Materials Processing
ScienceOpen source preview, 2025, 56(5), pp. 5296–5314
174
Zhigao Chen, Bo Wang, Dongwei Shu, Mingjun Chen, Fei Ding. Multiphysics
simulation and experimental study on inductively coupled plasma jet
pretreatment for SiCp/Al composites Materials & Design. 258 (2025)114659
https://doi.org/10.1016/j.matdes.2025.114659 Received 11 June 2025; Received in
revised form 21 July 2025; Accepted 27 August 2025
173
Yubo Gao, Huying Deng, Dongwei Shu, Youqi Huang, Aoxiang Huang. “Macro/micro
fracture and failure mechanism of high borosilicate glass under dynamic
compressive loading”. Journal of Materials Research and Technology. 37(2025)
4396-4406. [JMRTEC_14415]
172
Jian Yang, Bo Liu, Dongwei Shu, Qin Yang, Yunbo Zeng, Jun Huang.
Data-driven analysis of the process, organization and properties of large-size
complex thin-walled die-casting Aluminium alloys, Engineering Applications of
Artificial Intelligence. Vol 156 [EAAI_111244] published May 26 2025.
171
Jian Yang, Bo Liu, Dongwei Shu, Huizhao Li, Qin Yang, Tiegang Hu, Zhibai Wang,
Yunbo Zeng, Jun Haung, Xiaoliang Tang.
Effect of ultra vacuum assisted high pressure die casting on the mechanical
properties of Al-Si-Mn-Mg alloy. JALCOM_180531 published in Journal of Alloys
and Compounds. 2025 0423 FWCI 3.11po
#170
Jian Yang, Bo Liu, Dongwei Shu, Huizhao Li, Qin yang, Tiegang Hu, Zhibai Wang,
Yunbo Zeng, Jun Huang, Xiaoliang Tang, Siqi Zou
"Effect
of casting pressure on porosity, microstructure, and mechanical properties of
large die casting Aluminum alloy parts", accepted 2025-04-14
“International Journal of Metalcasting” IJMC-D-25-00043R2
#169
Wenhui Shi, Shuai Yue, Dongwei Shu, Yong Yuan, Zhonghua Du, Guangfa Gao. Repeatable
Energy Absorption Characteristics of the Oil-Negative Stiffness Honeycomb
Damping System “Construction and Building Materials” 467 (2025) 140297.
#168
Jian Yang, Bo Liu, Dongwei Shu, Qin Yang, Tiegang Hu. 2024. Vehicle
giga-casting Al alloys technologies, applications, and beyond. Journal of
Alloys and Compounds Volume 1013, 31
January 2025, 178552
Received
18 November 2024, Revised 6 January 2025, Accepted 7 January 2025, Available
online 9 January 2025, Version of Record 11 January 2025
#167
Jian Yang, Bo Liu, Dongwei Shu, Qin Yang, Tiegang Hu. 2024. Local stress/strain
field analysis of die-casting Al alloys via 3D model simulation with realistic
defect distribution and RVE modelling. Engineering Failure Analysis. Volume 168
(2025), 109104 https://doi.org/10.1016/j.engfailanal.2024.109104
166
Yang, J., Liu, B., Shu, D., Yang, Q., Hu, T. A
novel method for estimating internal porosity and predicting tensile properties
based on failure analysis of aluminum alloy die castings. Engineering
Failure Analysis Open source preview, 2025, 170, 109276
(2024 4 papers)
165
Yang, H., Shu, D.-W., Lu, H., Tao, R. Rotating
coupling of chiral identical twins in multimodal Kresling metamaterials for
achieving ultra-high energy absorption. Smart
Materials and StructuresOpen source preview, 2024, 33(7), 075002
#164
H Y Yang, H B Lu, D W Shu and Y Q Fu 2023 Multimodal origami shape memory
metamaterials undergoing compression-twist coupling Smart Mater. Struct. Volume
32, Issue 7, id.075013, 10 pp.
FWCI
1.56
#163
Shiwen Feng, Q.M. Li*, Zhongmin Xiao, Dongwei Shu. Elastic wave propagation in a porous composite
with gradient porosity.
International
Journal of Mechanical Sciences. 265(2024) Received 24 August 2023;
Received in revised form 26 November 2023; Accepted 3 December 2023
#162
Yuheng Liu, Dong-Wei Shu, Haibao Lu, Denvid Lau, Yong-Qing Fu. “3D printable
spatial fractal structures undergoing auxetic elasticity”. Extreme Mechanics
Letters
Volume
66, January 2024, 102112 https://doi.org/10.1016/j.eml.2023.102112
FWCI 1.75
(2023
5 papers)
#161
Yu Heng LIU*, Hai Bo LU, Dong Wei SHU, Wei Min Huang. An epigenetic
bi-stability of structural metamaterials undergoing dual matching shape-memory
effects. (submitted to Smart Mater. Struct. Manuscript reference: SMS-114873)
160
Liu, Y., Shu, D.-W., Lu, H., Tao, R. 3D
Printing Holey-Column Metamaterial Structure Undergoing Tailorable Buckling
Deformation of Local Instability
International
Journal of Applied MechanicsOpen source preview, 2023, 15(9), 2350081
159
Liu, Y., Shu, D.-W., Lu, H. Design
of Mechanical Auxetic Metamaterial for Heterogeneous Assembly, Programmable
Periodic Porous Elastomer Structures
International
Journal of Applied Mechanics Open source preview, 2023, 15(7), 2350057
#158 Yu Heng LIU*, Dong Wei SHU, Hai Bo LU. 3D printing shape memory polymer of laminated multi-component metamaterial towards optimization of auxetic and shape recovery behaviors". Smart Mater. Struct. Accepted Jan 9, 2023. Manuscript reference:
SMS-114536.R1
#157
Ziyu XING*, Dong-Wei SHU, Haibao LU, Yong-Qing FU. Undirected graphical
model of adjacency matrix for dynamic elasticity in polyelectrolyte hydrogels.
Polymer 264 (2023) 125531
(2022-10)
##156
Chen, Yong; Li, Dongming; Feng, Shuai; Huang, Qiong; Chen, Zheming; Shu,
Dongwei. Optimization and thermal-performance deep learning on carbon/epoxy
composite panels with microchannel structure for battery cooling. Applied
Thermal Engineering Volume 217. 25 November 2022 Article number 119162
#155
Yuheng Liu*, Linlong Peng, Zhenghong Li*, Haibao Lu and Dong-Wei Shu. 3D
Printed Nonuniform Auxetic Structure: Programmable Local Stiffness to Improve
Mechanical Property by Avoiding Buckling. International Journal of Applied
Mechanics Vol. 14, No. 10, 2250098 (2022)
#154
Ziyu XING*, Haibao LU, Dong-Wei SHU, Yong-Qing FU. Non-Euclidean
geometry model for chemo-mechanical coupling in self-assembled polymers towards
dynamic elasticity. Polymer. Volume 254, 21 July 2022, 125094
#153 Edwin Carcasona, Ronald M. Galindo, Akihiro Takita, Ethelda Magalang, Tabetha S. Galindo, Seiji Hashimoto, Takao Yamaguchi, Edgar U. Tibay, Dongwei SHU, Haruo Kobayashi, Kenji Amagai, Naoya Ohta, Noriaki Yoshiura, Anna Kuwana, Ayako Yano, and Yusaku Fujii. Very-Low-Cost Powered Air-Purifying Respirator (PAPR) “Distancing-Free Mask Industry (DFM-I) Prototype No.1” and Proposal for a Lockdown-Free Industry. Journal of Technology and Social Science (JTSS) P1-4. Vol.6, No.2, 2022.
#152
Ronald M. Galindo, Akihiro Takita, Edwin Carcasona, Ethelda Magalang, Tabetha
S. Galindo, Seiji Hashimoto, Takao Yamaguchi, Edgar U. Tibay, Dongwei SHU,
Haruo Kobayashi, Kenji Amagai, Naoya Ohta, Noriaki Yoshiura, Anna Kuwana, Ayako
Yano, and Yusaku Fujii. Low-Cost Powered Air-Purifying Respirator (PAPR)
“Distancing-Free Mask Frontline (DFM-F) Prototype No.1” for the Operational
Tests in Hospitals in Cebu City, Philippines. Journal of Mechanical and
Electrical Intelligent System (JMEIS) p1-6. Vol.5, No.2, 2022
#151
Yuheng Liu*, Ming Lei, Linlong Peng, Haibao Lu, Dong-Wei Shu. 3D
printing auxetic draft-angle structures towards tunable buckling complexity. 2022
Smart Mater. Struct. Vol 31 055010
#150
Xing, Ziyu*; Shu, Dong-Wei; Lu, Haibao; Fu, Yong-Qing. Untangling
the mechanics of entanglements in slide-ring gels towards both
super-deformability and toughness. Soft Matter. Volume 18, Issue 6, Pages 1302
– 1309 14 February 2022
#149
Zhenghong Li*, Yuheng Liu*, Haibao Lu and Dong-Wei Shu. Tunable
hyperbolic out-of-plane deformation of 3D-printed auxetic PLA shape memory
arrays. Smart Materials and Structures, Volume 31, Number 7 075025 20 June 2022
© 2022 IOP Publishing Ltd
#148 藤井雄作，Ronald M. Galindo, Edwin
Carcasona, 田北啓洋, Ethelda Magalang, Tabetha
S. Galindo, 橋本誠司, 山口誉夫, Edgar U. Tibay, Dongwei
Shu, 小林春夫, 天谷賢児, 太田直哉, 吉浦紀晃, 桑名杏奈,矢野絢子，“国際研究協力プロジェクト 低コスト個人用呼吸空気浄化デバイス開発と，フィリピン・セブ市内の病院での運用試験（第一報）”, 社会安全とプライバシー, Vol.6, No.1, pp.1-9, 2022.
#147 (in English) Y. Fujii, R.
Galindo, E. Carcasona, A. Takita, E. Magalang, T. Galindo, S. Hashimoto, T.
Yamaguchi, E. Tibay, D.W. Shu, H. Kobayashi, K. Amagai, N. Ohta, N. Yoshiura,
A. Kuwana, A. Yano, "1st Report on the International Collaboration
Project: Development of Low-Cost Powered Air-Purifying Respirator and Tests in
Hospitals in Cebu, Philippines", Japanese Journal of Social Safety
and Privacy, Vol.6, No.1, pp.1-9, 2022. (written in Japanese)
(2021-1)
146 Yuheng Liu, Ming Lei, Haibao Lu,
and Dong-Wei Shu. Sequentially tunable buckling in 3D printing auxetic
metamaterial undergoing twofold viscoelastic resonances. Smart Materials and
Structures. Volume 30, Number 10, 2021
(2020-1)
145 Ngoc San Ha, Guoxing Lu, DongWei Shu, T.X. Yu.
Mechanical properties and energy absorption characteristics of tropical fruit
durian (Durio zibethinus). Journal of the
Mechanical Behavior of Biomedical Materials. 104 (April 2020) in print
（2019-2）
144 Chengxin Du, Dongwei Shu, Zhonghua Du, Guangfa
Gao, Meng Wang, Zhengwang Zhu, Lizhi Xu. Effect of L/D on penetration performance of tungsten fibre/Zr-based bulk metallic glass matrix composite rod. International Journal of Refractory Metals & Hard Materials.
85 (Dec 2019)
143 Muhammad A. Kariem, Rafael C.
Santiago, Reuben Govender, Dong Wei Shu,
Dong Ruan, Gerald Nurick, Marcilio Alves, Guoxing Lu, Genevieve S. Langdon.
Round-Robin test of split Hopkinson pressure bar. International Journal of Impact Engineering. Vol.126 (2019) pp62-75
(2018-2)
142 Dongwei Shu, Iram R Ahmad, Jing
Xiao. Promising Magnesium Alloys for Mobility and Portability. Journal of
Technology and Social Science. 2018 Vol 2 No 2 page 1-6
141 Wang, Yonghu; Shu, Dongwei;
Yusaku, Fujii; Takita Akihiro, Ishima Tsuneaki and Araki Ryosuke. Comparison
between numerical analysis and the levitation mass method measurement test of a
spherical structure early impacting water. ADVANCES IN MECHANICAL
ENGINEERING Volume: 10 Issue: 1
Article Number: 1687814017748076
Published: JAN 6 2018
(2017-1)
140 S. C. Liu, G. X. Lu, D. W. Shu, Y. X. Zhou,
Z. Y. Zhao, "A New Design of Energy Absorbing Bolt", Key Engineering
Materials, Vol. 725, pp. 162-167, 2017
2016
137 X.M. Xiang, G. Lu,, G.W. Ma, X.Y. Li, D.W. Shu. Blast response of sandwich beams with thin-walled tubes as core. Engineering Structures. 127 (2016) 40-48
136* T. Y. Yang · D. W. Shu · B. J. Shi
· X. Bai,
Effects of disk surface roughness on static flying characteristics of air
bearing slider by using a combined method of Reynolds equation and rough disk
surface. Microsystem Technologies. Accepted: 27 August 2015 DOI
10.1007/s00542-015-2672-7
2015
135 Ryosuke Araki , Akihiro Takita, Prin Nachaisit, Dong-Wei Shu and Yusaku Fujii. Frictional Characteristics of a Small Aerostatic Linear Bearing. Lubricants. 2015, 3, 132-141; doi:10.3390/lubricants3020132.
134* Ahmad, I. R.; Shu, D. W.
Experimental and Constitutive Study of Tensile Behavior of AZ31B Wrought
Magnesium Alloy. JOURNAL OF ENGINEERING MECHANICS Vol 141(3) MAR 2015
2014
133*Q1 J Xiao, D W Shu, XJ Wang, “Effect of strain rate and
temperature on the mechanical behavior of magnesium nanocomposites”.
International Journal of Mechanical Sciences 89(2014)381–390.
132* Liu, Y; Shu, D.W. Coupled bending-torsion vibration of a homogeneous
beam with a single delamination subjected to axial loads and static end
moments. ACTA MECHANICA SINICA Vol 30(4)
P607-614, Aug 2014
131* Xiao, Jing; Ahmad, Iram
Raza; Shu, D. W. Dynamic behavior and constitutive modeling of magnesium alloys
AZ91D and AZ31B under high strain rate compressive loading MODERN PHYSICS
LETTERS B Vol 28(8) MAR 30 2014
130*Q1 Liu, Y.; Shu,
D. W. Free vibration analysis of exponential functionally graded beams with a
single delamination. COMPOSITES PART B-ENGINEERING vol 59 pp166-172 Mar 2014
129* Ahmad, I. R.; Shu, D. W.
Compressive and constitutive analysis of AZ31B magnesium alloy over a wide
range of strain rates. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS
PROPERTIES MICROSTRUCTURE AND PROCESSING Vol592 pp40-49 Jan 2014
128 Xiao, Jing; Shu, D. W.; Goh,
Kok Swee Effect of Temperature on the Dynamic Compressive Properties of
Magnesium Alloy and its Nanocomposite. Proceedings of SPIE Vol(9234) 2014
127 Yang LIU*, Jing
XIAO*, Dongwei SHU, Free Vibration of Delaminated Beams with an Edge
Crack, Procedia Engineering Volume 75, 2014, Pages 78–82.
126 Yang LIU*, Jing
XIAO*, Dongwei SHU, Free Vibration of Exponential Functionally Graded
Beams with Single Delamination, Procedia Engineering. Volume 75, 2014, Pages
164–168.
2013-7
125*Q1 Della, C. N.*;
Shu, D. Performance of 1-3 piezoelectric composites with porous
piezoelectric matrix APPLIED PHYSICS LETTERS Vol 103(13) SEP 2013
124 Yang Liu*, Dong Wei Shu.
Analytical Solution of the Vibration of Delaminated Bimaterial Beams Fully or
Partially Supported by Elastic Foundation. Applied
Mechanics and Materials Vol. 394 (2013) pp 75-79
123 Jing Xiao*, Dong
Wei Shu. (2013) Dynamic Response of Magnesium Alloy and its Nanocomposite
under High Strain Rate Compressive Loading. Applied Mechanics and Materials
Vol. 394 (2013) pp 20-25
122 Xiao, J. * and D. W. Shu (2013). The
effect of specimen size on the dynamic compressive behaviour of magnesium alloy
AZ31B. Key Engineering Materials
Vols. 535-536 (2013) pp 141-144
121 Ahmad, I. R.; Jing, Xiao;
Shu, D. W. Effect of Temperature on the Dynamic Compressive Properties of
Magnesium Alloy AZ91D. Key Engineering Materials Vol 535-536
pp133-136
120 Ahmad, I. R.; Syfiqu,
Muhammad; Jing, Xiao et al; Ed. Lu, GX; Zhang, QM. Strain rate effect on
microstructure of dynamically compressed Magnesium Alloy AZ31B. Key Engineering
Materials Vol 535-536 pp137-140
119*Q1 Liu, Yang; Shu, D.W. Free
vibration analysis of rotating Timoshenko beams with multiple delaminations.
COMPOSITES PART B-ENGINEERING Volume:
44 Issue: 1 Pages: 733-739 Published: JAN 2013
2012
118 I. R. Ahmad, D. W. SHU. (2012) “Anisotropic
Behaviour of AZ31B sheet at high strain rates” Journal of Applied Mechanics and Materials Vol. 151 pp.
726-730
117 I. R. Ahmad, D. W. SHU. (2012) “Magnesium
Alloys a Promising Option as Protection Materials”
Journal of Solid State Phenomena Vol. 185 pp. 116-118
2011
116 Shu, D.W. Vibration of beams with a
single delamination under axial loading (2011) Materials Science Forum,
675 677, pp. 477-480.
115 Ahmad, I.R., Shu, D.W. Effect of Specimen
Diameter in Compression at High Strain Rates (March 2011) Journal of
Engineering Mechanics, 137 (3), pp. 169-174.
114 Shu, D.W., Ahmad, I.R. Magnesium alloys:
An alternative for aluminium in structural applications (2011) Advanced
Materials Research, 168-170, pp. 1631-1635.
113 I. R. Ahmad, D. W. SHU. (2011) “Dynamic
response of magnesium alloy AZ31B under high strain rate compressive loading” Applied Mechanics and Materials Vol. 83 pp. 60-65
2010
112 I. R. Ahmad, SHU D. Wei.
(2010) “Tensile Properties of die-cast magnesium
alloy AZ91D at high strain rates in the range between 300 s-1 and
1500 s-1” Journal of Applied Mechanics and Materials. Vols. 24-25, pp: 325-330
111 I. R. Ahmad,
SHU D. Wei. (2010) “Mechanical Behaviour of Magnesium Alloy
AZ91D Using Split Hopkinson Tensile Bar (SHTB).” Proc. of
SPIE Vol. 7522 75222C-1
110 Shu, D.W., Yap, F.F., Gu, B., Shi, B.J. Effect of
disk clamping conditions on the operational shock response of hard disk drives
(2010) Digest of the Asia-Pacific Magnetic Recording Conference 2010, APMRC
2010, art. no. 5682262, .
109 Gu, B., Shu, D., Fujii, Y., Shi, B. Dynamic
response measurement of 1-inch HDD head arm assembly (2010) Applied
Mechanics and Materials, 36, pp. 52-56.
108 Chen, Y.H., Zhao, Y., Huang, W.M., Shu, D.W.
Kinematics of dragonfly (Sympetrum flaveolum) flight (2010) IFMBE
Proceedings, 31 IFMBE, pp. 56-59.
107 Shi, B.-J., Li, H.-Q., Song, S.-J., Shu,
D.-W., Gu, B. Influence of intermolecular force on dynamic performance of
air-bearing sliders with ultra-low flying heights (2010) Binggong
Xuebao/Acta Armamentarii, 31 (SUPPL. 1), pp. 98-101.
106 Shi, B.J., Gu, B., Shu, D.W., Jin, T.H. Modal
analysis and damping measurement of the head arm assembly of a small form
factor hard disk drive (2010) International Journal of Modern Physics B,
24 (1-2), pp. 26-33.
105 Gu, B., Shu, D., Shi, B. Shock pulse
amplitude and width effects on the shock response of an operational disk drive
(2010) International Journal of Modern Physics B, 24 (1-2), pp. 209-214.
104
SHU Dong Wei, Iram Raza AHMAD. (March 2010). Effect of specimen dimensions in
dynamic torsion testing. Advanced Materials Research, 97-101, 667-670.
2009
103 Ahmad, I.R., Shu, D.W. Compressive properties of AM50 and AZ91D alloys
using split Hopkinson pressure bar (2009) Proceedings of SPIE - The International
Society for Optical Engineering, 7493, art. no. 749326.
102 Luo J., Wang T.，Shu D.W., Wu J.K.,
2009, Finite element analysis of dynamic performance of the Read/Write arm
of HDD, Machinery & Electronics, Vol. 26, No. 7-9
101
Hongrui AO, Shao WANG, Bin GU, Dong Wei SHU. (2009). Shock effects on the
performance of the interface between the moving suspension lift-tab and the
ramp in a load/unload drive. Microsystem Technologies-Micro-And
Nanosystems-Information Storage And Processing Systems, 15, 1763–1775.
100 C. N. Della D. Shu. (2009). Free Vibration Analysis of Multiple Delaminated
Beams under Axial Compressive Load. Journal of Reinforced Plastics and
Composites, 28(11), 1365-1381.
99 Gu, B., Shu, D., Fujii, Y.,
Maru, K., Shi, B., Liu, Y. Shock pulse width effects in operational drop test
simulation of a small form factor disk drive with sub-10 nm air bearing slider (2009) Physics Procedia, 2 (1), pp.
13-17.
98 Fujii, Y., Maru, K., Shu, D.-W., Gu, B.,
Yamaguchi, T., Lu, R., Jutanggoon, T., Yupapin, P. Material tester with
static and dynamic micro forces (2009) Physics Procedia, 2 (1), pp.
5-11.
97 Gu, B., Shu, D., Fujii, Y., Shi, B. Dynamic
force measurement of a head arm assembly of a hard disk drive by numerical
analysis and experiments (2009) IEEE Transactions on Magnetics, 45
(11), art. no. 5297563, pp. 5034-5037.
96 Shi, B.-J., Sun, Y.-J., Shu, D.-W., Jiang,
H., Yang, T.-Y. Research and advances on shock and vibration resistance of
hard disk drives (2009) Jisuan Lixue Xuebao/Chinese Journal of
Computational Mechanics, 26 (3), pp. 324-329.
95
Christian N. DELLA Dong Wei SHU. (2009). Free vibrations of delaminated beams
in prebuckled states: Lower and Upper Bounds. Structural Engineering and Mechanics,
31(1), 113-116.
94 Jiang Dazhi, Shu
D.W., 2009, Dynamic Contact Performance of Rubber Materials for Designing
Wiper Blades, Journal of Materials Engineering and Performance, Vol. 18,
No. 3, pp. 255-262
93
Feng ZHU, Guoxing LU, Dong RUAN, Dongwei SHU. (2009). Tearing of metallic
sandwich panels subjected to air shock loading. Structural Engineering and
Mechanics, 32(2), 351-370.
92
Shi BJ, Li HQ, Shu DW. Zhang, Y.M (2009). Nonlinear air-bearing slider modeling
for hard disk drives with ultra-low flying heights. Communications in Numerical
Methods in Engineering, 25 (10), pp. 1041-1054.
2008
89
Parlapalli MR, Soh KC, Shu DW. (2008). Delamination buckling of Kevlar and
Twaron stitched glass\epoxy composite laminates by experiments. Diffusion and
Defect Data Pt.B: Solid State Phenomena, 136, 109-114.
88
Della CN, Shu D. (2008). A comparative study of the hydrostatic performances of
1-3 piezoelectric composites with a porous matrix. Advanced Materials
Research, 47-50(Part 1-2), 503-506.
87 D W SHU, C Q LUO,
G X LU, 2008, Numerical Simulation of the Influence of Striker Bar Length on
SHPB Measurements, International Journal of Modern Physics B, Vol. 22, No.
31 & 32, pp. 5813-5818
86 W Hou, Z Wang, L
Zhao, G X Lu, D W Shu, 2008, Load-Carrying Capactities for Circular Metal
Foam Core Sandwich Panels at Large Deflection, International Journal of
Modern Physics B, Vol. 22, No. 31 & 32, pp. 6218-6223
85 Parlapalli, MR.,
Bin G, Dongwei, Shu, Fujii Y, 2008, response measurement of the head arm
assembly of a hard disk drive by numerical analysis and experiments,
International Journal of Precision Engineering and Manufacturing, Vol. 9, No.
4, pp. 22-25
84 PARLAPALLI MADHU SUDHANA RAO
Dongwei Shu Gin B. Chai, 2008, Buckling of Composite Beams with Two
Enveloped Delaminations: Lower and Upper bounds, Computers &
Structures, Vol. 86, No. 23-24, pp. 2155-2165
83 Bin Gu, Dong-Wei Shu, Yusaku Fujii and
Bao-Jun Shi, 2008, Inertial force measurement of an actuator arm of a hard
disk drive in free oscillation by numerical analysis and experiments,
Proceedings SPIE, Vol. 7130, No. 7130 2A, pp. 1-6
2007
78. Christian N. Della and Dongwei Shu, 2007, Effective
properties of 1-3 piezoelectric composites: effect of polarization orientation,
SPIE Proceedings, Vol. 6423, No. 1, pp. 642323-1--642323-8.
77
Parlapalli Madhusudhana Rao, Soh Kwok Chye, Shu D.W., Ma, G.W., 2007,
Experimental Investigation of Delamination Buckling of Stitched Composite
Laminates, Composites Part A -
Applied Science and Manufacturing (United Kingdom), Vol. 38A, No. 9, pp 2024 - 2033.
76
Chen BJ, Shu D.W., Xiao Z.M., 2007, Dislocation interacting with collinear
rigid lines in piezoelectric media , Journal of Mechanics of MATERIALS and
STRUCTURES (United States). Vol.2 (1) 23-42
74.
Shi, B.-J.; Shu, D.-W.; Luo, J.; Gu, B.; Ma, G.-W.; Ng, Q. Y.; Gan, S.,
Operational Shock Simulation of the Head–Disk Assembly of a Small-Form Factor
Drive, IEEE Transactions on Magnetics, Volume 43, Issue 11, Nov. 2007
Page(s):4042 - 4047
72 Fujii, Y., Shu, D.-W. Optical method for
evaluating the impact response of 1" HDD arm (2007) Proceedings of
SPIE - The International Society for Optical Engineering, 6722, art. no.
672216, .
67 Shu D.W., Shi B J, MENG H, Yap F.F., Jiang D Z, NG Q, Razman Zambri, J H T Lau,
Cheng C S, 2007, Shock analysis of a head actuator assembly subjected to
half-sine acceleration pulses, International Journal of Impact Engineering
(United States), Vol. 34, No. 2, pp 253 - 263.
66 Della CN, Shu D.W., 2007, Vibration of Delaminated Composite Laminates: A
Review, ASME Applied mechanics reviews (United States). Vol 60, pp1-20
65 Shu D.W., Zhou W., Ma, G.W., 2007, Tensile Mechanical Properties of AM50A Alloy
by Hopkinson Bar, Key Engineering Materials (Switzerland), Vol. 340-341,
pp 247 - 254.
2006(13)
61 Shi B J, Shu D.W., Luo J, Ng Q Y, Lau JHT, 2006, Experimental and
Numerical Analyses of the Head Arm Assembly of a Micro-drive, Key
Engineering Materials (Switzerland), Vol. 326-328, pp 1585 - 1588.
60 Shu D.W., Shi B J, Meng H, Yap F.F., Jiang D Z, Ng Q Y, R. Zambri, J.H.T. Lau,
2006, The pulse width effect of single half-sine acceleration pulse on the
peakresponse of an actuator arm of hard disk drive, Materials Science &
Engineering A (Switzerland), Vol. 423, No. 1-2, pp 199 - 203.
59 Chen B J, Shu D.W., Xiao Z.M., 2006, Electro-elastic interaction of a
piezoelectric screw dislocation and collinear rigid lines, International
Journal of Engineering Science (United Kingdom), Vol. 44, pp 422 - 435.
48
Shi
Bao Jun, Shu D.W., Wang Shao, Luo Jun, Q Ng, Lau J H T, Razman Zambri, 2005,
Shock Response and Power Spectrum Analysis of a Head Actuator Assembly,
Transactions on Engineering Sciences (United Kingdom), Vol. 49, pp 470 - 479.
47 Shi
B. J., Shu D.W., Song S. J., Zhang Y. M., 2005, Solving Burgers Equation by a
Meshless Method, Modern Physics Letters B (Unknown), Vol. 19, No. 28-29, pp
1651 - 1654.
46 Della
CN, Shu D.W., 2005, Vibration of Beams with Double Delaminations, Journal of
Sound & Vibration (United Kingdom), Vol. 282, No. 3-5, pp 919 - 935.
45
He, Z., Ma Hongzhi Wang, J., Tan, G.E.B., Shu, D., Zheng, J. Static
and dynamic fracture behavior of layered alumina ceramics (2005)
Ceramic Engineering and Science Proceedings, 26 (7), pp. 251-255.
24. Shu D.W., 2002, A tube under transverse
loading--FEM and experiment, Key Engineering Materials (Switzerland),
Vol. 233-236, pp 731 - 736.
23. Wang Bin, Shu D.W., 2002, Experimental investigation on the viscoelastic
properties of porous metals. , Journal of Materials Processing Technology
(Netherlands), Vol. 125, pp 144 - 149.
22. Wang B, Zheng J, Shu D.W., 2002, stress and strain rate sensitivity of
37wt%Pb 63wt%Sn Eutectic solders. , Key Engineering Materials (Switzerland),
Vol. 233-236, pp 181 - 186.
2020
Dongwei SHU.
“Adapt and Improve on the Distancing-Free Mask”. Proceedings of International
Conference on Technology and Social Science 2020 (ICTSS 2020) Dec 2-4, 2020
Dongwei SHU.
“Light Magnesium Alloys for Mobile Applications”. Proceedings of International
Conference on Technology and Social Science 2020 (ICTSS 2020) Dec 2-4, 2020
2018
Liu Sicong, SHU Dongwei, LU Guoxing, ZHAO Zhiye, ZHOU Yingxin “Development of Conceptual Design of Dynamic Bolts”, Nanjing, South East University, Dec 29-30, 2018
I R Ahmad, J Xiao, Dongwei SHU. “Light Magnesium Alloys for Mobile Applications”. 2nd International Conference on Advanced Technologies in Design, Mechanical and Aeronautical Engineering (ATDMAE 2018) Dalian, China, July 1-3, 2018
Dongwei SHU, Iram R Ahmad, Jing Xiao.
“Promising Magnesium Alloys for Mobility and Portability”. Journal of
Technology and Social Science (JTSS) J. Tech. Soc. Sci., Vol.2, No.2, 2018.
March 07-10, 2018. Kiryu, Gunma University, Japan
Sicong Liu, Guoxing Lu, Dongwei SHU,
Yingxin Zhou, Zhiye Zhao. “A New Design of Energy Absorbing Bolt” AEPA2016, Dec
2016, Hiroshima, Japan
CN Della, Kasem Chaisieng, DW Shu. Piezoelectric Composites with Soft Elastomer Inclusions for Biomedical Imaging Applications. The 16th International Conference on Biomedical Engineering (ICBME 2016), Singapore
Jing XIAO,
Dong Wei SHU, Guo Xing LU. “High strain rate response of magnesium
nanocomposite.” Smart Equipment and Robot Forum. Aug 3-5, 2016, Huludao, Hebei, China. 1st International Conference on Impact Loading of
Structures and Materials. May 22-25, 2016, Turin, Italy.
XIAO Jing and
SHU Dong Wei. “MECHANICAL BEHAVIOUR OF MAGNESIUM NANOCOMPOSITES AT WIDE RANGE
OF STRAIN RATES AND TEMPERATURES”. International Symposium on Advanced
Materials and Structures (ISAMS 2016). HKUST Jan 2-4, 2016. HongKong
Christian N.
Della and Dong Wei SHU. “Vibration Analysis of Delaminated Composite Beams in
Prebuckled States using Lower and Upper Bound Solutions”. The 2015
International Conference on Materials for Advanced Technologies of the
Materials Research Society of Singapore. June 28 – July 3, 2015, Singapore
Christian N. Della and Dong Wei SHU. “Vibration of Porous
Beams with Embedded Piezoelectric Sensors and Actuators”. June 15-18, 2015.
Lisbon ICCS18 - 18th International Conference on Composite Structures.
Christian N. Della, Li Qiang Eng and Dong Wei SHU.
“Effect of interlayer on the effective performance of piezoelectric composites
with porous matrix”. June 15-18, 2015. Lisbon ICCS18 - 18th International
Conference on Composite Structures.
X.M. Xiang, G. Lu*, Xiangyu Li, D.W.
Shu. “Blast tests and finite element simulations on sandwich beams with tubular
cores”. 5th International Conference on Design and Analysis of Protective
Structures (DAPS2015), 19 - 21 May 2015, Singapore
Jing Xiao,
Dong Wei SHU and I. R. Ahmad.“MECHANICAL CHARACTERIZATION OF MAGNESIUM ALLOY
REINFORCED WITH SIC PARTICLES AT HIGH STRAIN RATES”. The 2014 SEM Fall Conference and International Symposium on Intensive
Loading and Its Effects 19-22 October 2014, the Friendship Hotel, Beijing,
China.
Jing Xiao, Dong Wei SHU and I. R. Ahmad. “COMPRESSIVE
CHARACTERIZATION OF MAGNESIUM MATRIX COMPOSITES REINFORCED WITH SIC PARTICLES
OVER WIDE RANGE OF STRAIN RATES” 6th international conference on PROTECTION OF
STRUCTURES AGAINST HAZARDS 16-17 October 2014, Tianjin Architecture University,
Tianjin, China.
Iram Raza Ahmad, Xiao Jing, and SHU Dong Wei
(presenter). “Mechanical Behaviour of AZ91D and AZ31B Magnesium Alloys at Wide
Range of Strain Rate and Temperature”. First International Symposium on
Machining and Mechanics of Composites, ISMMC 2014, 28-30 June, 2014, Hangzhou
XIAO Jing and SHU Dong Wei. “High Strain Rate Behavior of Magnesium
Nanocomposite with Variation of Temperature”. The 4th
International Symposium on Impact Energy Absorption. June 21-23, 2014, Hangzhou
Eastern Cloud Hotel/Hangzhou City/Zhejiang Province, China
J Xiao and D W SHU. “Dynamic response of magnesium alloy and its nanocomposite under high strain rate compressive loading”. The International Union of Materials Research Societies International Conference on Advanced Materials 2013 (IUMRS-ICAM2013). September 22–23, 2013 Qingdao, China.
Jing XIAO, Dong Wei SHU. ”Dynamic Response of
Magnesium Alloy and its Nanocomposite under High Strain Rate Compressive
Loading” Applied Mechanics and Materials Vol.
394 (2013) pp 20-25© (2013) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.394.20
Yang LIU, Dong Wei SHU. “Analytical Solution of the
Vibration of Delaminated Bimaterial Beams Fully or Partially Supported by
Elastic Foundation” Applied Mechanics and Materials
Vol. 394 (2013) pp 75-79© (2013) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.394.75
Yang LIU, Jing XIAO, Dongwei SHU. “Free
Vibration of Delaminated Beams with an Edge Cracks”. International Conference
on Materials for Advanced Technologies 2013, Singapore. MRS Singapore - ICMAT
Symposia Proceedings. Procedia Engineering 00 (2013) 000–000
Yang LIU, Jing XIAO, Dongwei SHU. “Free
Vibration of Exponential Functionally Graded Beams with Single Delamination”.
International Conference on Materials for Advanced Technologies 2013,
Singapore. MRS Singapore - ICMAT Symposia Proceedings. Procedia Engineering 00
(2013) 000–000
Mohamad Raza Iram and SHU Dong Wei (Presenter). “Mechanical Behaviour of Magnesium Alloys At High Strain Rates”. International Symposium on Dynamic Behavior of Materials and Structures. 26-29 June, 2012. Ningbo, P. R. China
Iram Raza AHMAD and Dong Wei SHU. “Magnesium Alloys
Promising Future Structural Materials: A Review”.
6th Japan-Korea-China Student Symposium 2012, March 9-10,
2012, Tokyo Institute of Technology, Tokyo, Japan
LIU Yang and SHU Dong Wei. “Coupled Flexural-Torsional Vibration of Delaminated Beams Subjected to Axial Loads and Static End Moments”. The 3rd International Symposium on Plasticity and Impact (ISPI’2011). Hong Kong University of Science and Technology. 8 Dec – 9 Dec, 2011
Gang MA, Jianming YUAN, and Dongwei SHU. “Mechanical Properties of Aluminum Alloy 6061 at High Strain Rate”. ICMAT 11th International Conference for Materials and Advanced Technologies. June 26 - July 1, 2011.Singapore
Gang MA, Jianming YUAN, and Dongwei SHU. “Mechanical Properties of Mild Steel JIS G3123 at High Strain Rate”. ICMAT 11th International Conference for Materials and Advanced Technologies. June 26 - July 1, 2011. Singapore
Iram Raza AHMAD and Dong Wei SHU. “Magnesium Alloys a Promising Option as Protection Materials”. ICMAT 11th International Conference for Materials and Advanced Technologies. June 26 - July 1, 2011. Singapore
Y Liu and DW Shu. “Vibration Of Beams With Two Non-Overlapping Delaminations Under Axial Compressive Loading”. The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-12), Hong Kong Special Administrative Region, China, 24-26 January 2011
2010
Dong Wei SHU, Bao Jun SHI, and Jun LUO. “Numerical simulation of the drop test of Hard Disk Drives.“ The 2nd
International Conference on Science and Engineering (ICSE 2010). Sedona Hotel,
Yangon, Myanmar, December 2 - 3, 2010
Iram Raza Ahmad and SHU Dong Wei. “Dynamic response of
magnesium alloy AZ31B under high strain rate compressive loading”. Presented at
The International Conference on Experimental Mechanics and The 9th Asian
Conference on Experimental Mechanics. Nov 29- Dec 1, 2010 ICEM10 KualaLumpur, Iram J App Mech Mat.
D W Shu. “Vibration of Beams
with A Single Delamination under Axial Tensile Loading”. The 7th International Forum on Advanced
Material Science and Technology, Dalian University of Technology, June
26-28, 2010, Dalian, China.
Bin Gu, Dongwei SHU, Yusaku Fujii and Baojun
SHI. “Dynamic Response Measurement of 1-inch HDD Head Arm Assembly”.
International Conference on Precision Instrumentation and Measurement 2010
(CPIM2010). Kiryu, Gunma, Japan, 17-20 March 2010, Special issue of Applied Mechanics and Materials
SHU Dong Wei , Iram Raza AHMAD. “Effect of specimen dimensions in dynamic torsion testing”. International Conference on Manufacturing Science and Engineering (ICMSE 2009). Dec 26- 28, 2009. Zhuhai, China.
SHU D. W, I. R. Ahmad.
“Mechanical Behaviour of Magnesium Alloy AZ91D Using Split Hopkinson Tensile
Bar (SHTB)”. 4th International Conference on Experimental
mechanics 2009(ICEM 2009). Nov. 18-20, 2009, Singapore
SHU Dong Wei.
“Split Hopkinson Pressure Bar”. The Second
International Symposium on Plasticity and Impact (ISPI’09) Oct 23-25, 2009. Beijing
Dong Wei SHU. “EXPERIMENTAL HALF-SINE ACCELERATION
PULSE USING HAMMER” IEEE ICMA 2009, 2009 IEEE International Conference on
Mechatronics and Automation. August 9 - 12, 2009. Changchun, Jilin, China
Iram Raza AHMAD, SHU Dong Wei. “COMPRESSIVE PROPERTIES OF AM50 AND AZ91D ALLOYS USING HOPKINSON BAR (SHPB)”. International Symposium on: Smart Material and Nanotechnology, to be held 8-11 July 2009, in Weihai, China.
SHI B.J., GU B. SHU D.W., JIN
T.H. W Shi. “Modal Analysis and Damping Measurement of the Head Arm Assembly of
a Small Form Factor Hard Disk Drive”. ICMAT 2009
International Conference on Materials for Advanced Technologies and IUMRS – ICA
2009. International Union of Materials Research Societies – International
Conference in Asia 2009. Singapore. 28 June - 3 July 2009.
BIN GU; Dong-Wei Shu; Bao-Jun
Shi. “Operational Shock Response of A Small Form Factor Hard Disk Drive”. ICMAT 2009 International Conference on Materials for
Advanced Technologies and IUMRS – ICA 2009. International Union of Materials
Research Societies – International Conference in Asia 2009. Singapore. 28 June
- 3 July 2009.
Bin
GU, Dongwei SHU, Yusaku Fujii, Koichi Maru, Baojun SHI and Yan LIU. “Shock pulse width
effects in operational drop test simulation of a small form factor disk drive
with sub-10 nm air bearing slider”. Frontier Research in Nano Scale Science and
Technology. Physics Procedure 2009. Isan, Thailand. Apr 28, 2009
Shi B.J.
Shu D.W. and Fujii Y. “Shock Simulation of the Actuator Arm of a Hard
Disk Drive”. ISQMPM April 2009 Gunma University, Japan
B.
J. Shi, D. W. Shu, B. Gu, and W. S. Yuan, 2009, Design Considerations for
Reducing Shock Responses of a Micro-Drive, APMRC2009, Asia-Pacific Magnetic
Recording Conference, Singapore, Singapore, pp. BS-05 Jan 2009
Bin GU, Dongwei SHU, Yusaku Fujii, Bao Jun SHI, 2009,
Dynamic Force Measurement of a Head Arm Assembly of a Hard Disk Drive by
Numerical Analysis and Experiments, APMRC2009, Asia-Pacific Magnetic
Recording Conference, Singapore, Singapore, pp. ER-04 Jan 2009
2008
Bin Gu, Dong-Wei Shu, Yusaku Fujii and Bao-Jun Shi,
2008, Inertial force measurement of an actuator arm of a hard disk drive in
free oscillation by numerical analysis and experiments, Fourth International
Symposium on Precision Mechanical Measurements, Hefei, Anhui Province,
China, China pp. 2A 1-6
Dong
Wei SHU, Chun Qi LUO, Guo Xing LU, 2008, NUMERICAL SIMULATIONS OF THE INFLUENCE
OF STRIKER BAR LENGTH ON SHPB MEASUREMENTS, The Asia-Pacific Conference on
Engineering Plasticity and Its Application (AEPA2008), Daejeon, Korea,
South Korea, pp. 12-13
W. Hou, Z. Wang, G Lu, D Shu, L Zhao, 2008,
Load-carrying capacities for circular metal foam core sandwich panels at large
deflection, The 9th Asia-Pacific Conference on Engineering Plasticity and
its Application (AEPA2008), Daejon Korea, South Korea, pp. 6-7