Dr Sunil Chandrakant Joshi

Associate Professor

School of Mechanical & Aerospace Engineering

College of Engineering

ResearchGate: connect

 

CONTACT DETAILS

=======================

Email: MSCJOSHI@ntu.edu.sg

Phone: (+65) 6790 5170

Office: N3-02b-42

GOOGLE: TTTwcqIAAAAJ

SCOPUS: 7402525010

 

 

 

  • Patents

    1. Joshi S. C. and Mahesh Sachithanadam, May 2015, Silica Aerogel Composites, US2015/0141533 A1. LINK

  • Books & Book Chapters

    Books

    2. Mahesh S., Joshi, S. C. (2016) Silica Aerogel Composites, Novel Fabrication Methods, Springer, ISBN: 978-981-10-0438-4 (Print) 978-981-10-0440-7 (Online)

    1. Ali M., Joshi S. C. (2013) Impact Damage Resistance of Modified Prepreg Composites, LAMBERT Academic Publishing (LAP), Germany, ISSN: 978-3-659-38080-8. LINK

    Book Chapters

    8. Dikshit V., Joshi S.C. (2020) Modeling Fiber Bridging and Matrix Strengthening Effect in Multiscale-Woven Composites, Chapter 3, Fiber-Reinforced Nanocomposites: Fundamentals and Applications, Editors Baoguo Han, et al. LINK

    7. Dikshit V., Joshi S.C. (2020) Manufacturing of Multiscale Interlaminar Interface Composites and Quantitative Analysis of Interlaminar Fracture Toughness, Chapter 12, Fiber-Reinforced Nanocomposites: Fundamentals and Applications, Editors Baoguo Han, et al., Mar 2020, LINK

    6. Dikshit V., Joshi S.C. (2020) Interlaminar Fracture Morphology Of Multiscale Interlaminar Interface Composites, Chapter 14, Fiber-Reinforced Nanocomposites: Fundamentals and Applications, Editors Baoguo Han, et al., Mar 2020, LINK

    5. T.Y. Ng, S.C. Joshi, J.J. Yeo, and Z.S. Liu (2016) Effects of Nanoporosity on the Mechanical Properties and Applications of Aerogels in Composite Structures, Chapter 4, contributed to Springer International Publishing Switzerland 2016, Advances in Nanocomposites, S.A. Meguid (ed.) LINK

    4. Ali M., Joshi S. C. (2013) Low Velocity Impact Analysis of Glass/Phenolic Prepreg Laminates Engineered with Core Shell Microparticles, contributed to Recent Advances in Composite Materials, Bloomsbury Publisher, New Delhi, India.

    3. Joshi S.C. (2011-12) Processing Science for Polymeric Composites in Aerospace, contributed to Aerospace Materials Handbook, Advances in Materials Science and Engineering Book Series published by CRC Press, Taylor & Francis, United States. LINK

    2. Joshi S.C. (2010-11). The Pultrusion Process in Polymer Matrix Composites, contributed to Handbook of Polymer Matrix Composite Manufacturing, Chapter 12, Edited by: Dr Suresh G. Advani & Dr Kuang-Ting Hsiao, Woodhead Publishing Ltd, Cambridge, UK. PP 381-408. LINK

    1. Joshi S.C. (2009). Gelation of MC and HPMC in various media contributed to Handbook of Hydrogels: Properties, Preparation & Applications, Chapter 8, Nova Science Publishers, PP 243-280. LINK

  • Journal Publications

    International

    (Find a permitted copy of some of the papers HERE)

    107. (2021) Mathew E., Joshi S.C., Manikandan P., Enhancement in Interply Toughness of BMI Composites Using Micro‐Thin Films, Journal of Composites Science (MDPI), 5, 49. LINK to DOWNLOAD

    106. (2020) Bhudolia S.K., Gohel G., Leong K.F., Joshi S.C., Damping, impact and flexural performance of novel carbon/Elium® thermoplastic tubular composites, Composites Part B: Engineering 203, 108480. LINK

    105. (2020) Joshi S.C., Boosting Inter-ply Fracture Toughness Data on Carbon Nanotube-Engineered Carbon Composites for Prognostics, Journal of Composites Science, as part of the Special Issue Carbon Fiber Composites (MDPI), 4, 170. LINK to DOWNLOAD

    104. (2020) Joshi S.C., Knowledge Based Data Boosting Exposition on CNT-Engineered Carbon Composites for Machine Learning, Advanced Composites and Hybrid Materials (Springer), 3:354–364. LINK to DOWNLOAD

    103. (2020) Bhudolia S.K., Gohel G., Joshi S.C., Leong K.F., Vibration damping and dynamic mechanical attributes of core-shell particles modified glass epoxy prepregs cured using microwave irradiations, Composites Communications, Vol 21, Oct 2020, Article 100412. LINK

    102. (2020) Bhudolia S.K., Gohel G., Joshi S.C., Leong K.F., Quasi-static indentation response of core-shell particle reinforced novel NCCF/Elium® composites at different feed rates, Composites Communications, Vol 21, Oct 2020, Article 100383. LINK

    101. (2020) Boon Y.D., Joshi S.C., Bhudolia S.K., Gohel G., Recent advances on the Design Automation for Performance-Optimized Fiber Reinforced Polymer Composite Components, Journal of Composite Science (MDPI), May 2020, 4(2), 61. LINK to DOWNLOAD

    100. (2020) Joshi S.C., COMPOSITES: A Pragmatic Knowledge-Based Engineering Data Boosting Process, Open Access Journal of Engineering Sciences, Mar 2020 (Springfield), LINK to DOWNLOAD

    99. (2020) Li W.H., Samson L-I, Tan D., Simonini L., Dudon J-P, Leong F.N., Tay R.Y., Tsang S.H., Joshi S.C., Teo E.H.T., Thermal conductivity enhancement and shape-stabilization of phase change materials using three-dimensional graphene and graphene powder, Energy & Fuels (American Chemical Society), Jan 2020, Accepted. LINK

    98. (2019) Loh J.Y., M Anand P., Wang S., Joshi S.C., Viswanathan V., Ramakrishna S., Optimal segmented rotor design for the embedded electrical machine for the more electric aircraft, The Journal of Engineering, 2019 (17), pp 4321-4324. LINK

    97. (2019) Boon Y.D., Joshi S.C., A review of methods for improving interlaminar interfaces and fracture toughness of laminated composites, Materials Today Communications (Elsevier), Dec 2019, 10.1016/j.mtcomm.2019.100830, Vol 22, March 2020, 100830. LINK

    96. (2019) Bhudolia S.K., Joshi S.C., Makam R., Gohel G., Boon Y.D., Flexural characteristics of novel carbon methylmethacrylate composites, Composites Communications (Elsevier), Jun 2019, Vol 13, pp 129-133. LINK

    95. (2019) Bhudolia S.K., Joshi S.C., Bert A., Gohel G., Makam R., Energy characteristics and failure mechanisms for textile spread tow thin ply thermoplastic composites under low-velocity impact, Fibers and Polymers (Springer), Aug 2019, 20(8):1716-1725. LINK

    94. (2019) Y.D. Boon, Sunil C Joshi, L.S. Ong, Bimodulus-Plastic Model for Pre-Failure Analysis of Fiber Reinforced Polymer Composites, Mechanics of Materials (Elsevier), Vol 134, Jul 2019, pp 18-29. LINK

    93. (2019) Bhudolia S.K., Joshi S.C., Boon Y.D., Experimental and Microscopic Investigation on Mechanical Performance of Textile Spread-Tow Thin Ply Composites, Fibers and Polymers (Springer), Feb 2019, accepted. LINK

    92. (2019) Bhudolia S.K., Kam K.K.C., Perrotey P., Joshi S.C., Effect of Fixation Stitches on out-of-plane Response of Textile Non-Crimp Fabric Composites, Journal of Industrial Textiles (SAGE), Feb 2019, Vol 48, Issue 7, pp 1151-1166. LINK

    91. (2018) Bhudolia S.K., Joshi S.C., Low-Velocity Impact Response of Carbon Fibre Composites with Novel Liquid Methylmethacrylate Thermoplastic Matrix, Composite Structures (Elsevier), Nov 2018, Vol. 203, pp 609-708. LINK

    90. (2018) Boon Y.D., Joshi S.C., Ong L.S., Interfacial Bonding between CFRP and Mechanically-Treated Aluminum Liner Surfaces for Risers, Composite Structures (Elsevier), Mar 2018, Vol 188, pp 374-386. LINK

    89. (2018) Joshi S.C., Manikandan P., Jothi Y., Enhancement Studies on Manufacturing and Properties of Novel Silica Aerogel Composites, Gels (MDPI), Mar 2018, Vol. 4, Issue 1. LINK to DOWNLOAD

    88. (2018) Bhudolia S.K., Perrotey P., Joshi S.C., Sunil C. Joshi, Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix, Composites Part B (Elsevier), Feb 2018, Vol. 134, pp 246-253. LINK

    87. (2018) Zhong Y., Suraj R., Wang C., Chia E.S.M., Joshi S.C., Zhong C., Damage advancement behavior in braided composite structure for mini aerial vehicle, Mechanics of Advanced Materials & Structures (Taylor & Francis), Vol. 25 - 2018, Issue 11. LINK

    86. (2017) Bhudolia S.K., Perrotey P., Joshi S.C., Enhanced Vibration damping and dynamic mechanical characteristics of composites with novel pseudo-thermoset matrix system, Composite Structures (Elsevier), Nov 2017, Vol. 179, pp 502-513. LINK

    85. (2017) Dikshit V., Bhudolia S.K., Joshi S.C., Multiscale Polymer Composites: A Review of the Interlaminar Fracture Toughness Improvement, Fibers, (MDPI), Oct 2017, Vol. 5, Issue 4, p 38. LINK to DOWNLOAD

    84. (2017) Wang L., Wu J., CHen C., ZHeng C., Li B., Joshi S.C., Zhou K., Progressive Failure Analysis of 2D Woven Composites at the Meso-micro Scale, Composite Structures (Elsevier), Oct 2017, Vol. 178, pp 395-405. LINK

    83. (2017) Naik R., Joshi S.C., 2017, Optimizing the Surface Quality of Textile Composites for Bonded Repairs, International Research Journal of Materials Sciences and Applications (eSciPub), Vol. 1, No. 7, 1:7. LINK

    82. (2017) Ali M., Joshi S.C., Sultan M.T.H., Palliatives for Low Velocity Impact Damage in Composite Laminates, Advances in Materials Science and Engineering (Hindawi), Vol 2017, 16 pgs. LINK

    81. (2017) Bhudolia S.K., Perrotey P., Joshi S.C., Mechanical and vibration response of insulated hybrid composites, Journal of Industrial Textiles (SAGE), Jun 2017, LINK

    80. (2017) Bhudolia S.K., Perrotey P., Joshi S.C., Optimizing Polymer Infusion Process for Thin Ply Textile Composites with Novel Matrix System, Materials (MDPI), Feb 2017, 10, 293, pp 1-19.LINK

    79. (2017) A.S. Ganapathi, Sunil C. Joshi, Zhong Chen, Experimental and numerical investigation of process-induced deformations of Glass/Epoxy wind turbine blade spar cap, Journal of Composite Materials (Elsevier), Jan 2017. LINK

    78. (2016) A.S. Ganapathi, Muneesh M., S.C. Joshi, Zhong C., A.K. Asundi, Swee C.T., In-situ measurement and numerical simulation of resin pressure during Glass/Epoxy prepreg composite manufacturing, Measurement (Elsevier), Vol 94, pp505-514. LINK

    77. (2016) Joshi S.C., A. A. Sheikh, A. Dineshkumar, Zhao Yong, Development and evaluation of aerogel-filled BMI sandwich panels for thermal barrier applications, AIMS Materials Science, MaterSci-138, Jul 2016. LINK

    76. (2016) Y.D. Boon, Sunil C. Joshi, Predictive Model for Tensile Properties of Carbon Fiber-Reinforced Polymers at Various Moisture Contents, Plastic and Polymer Technology (Science & Engg Publishing). LINK

    75. (2016) Prabhu M., Loh J., Joshi S.C., Viswanathan V., Ramakrishna S., Gajanayake C., Gupta A., Magnetic Loading of Soft Magnetic Material Selection Implications for Embedded Machines in More Electric Engines, IEEE Transactions on Magnetics, May 2016, Vol:52, Issue: 5. LINK

    74. (2016) Zhong Y.C., Joshi S.C., Initiation of structural defects in CFRP composites under hygrothermal environments, Journal of Composite Materials (Elsevier), Apr 2016, Vol. 50, No. 8, pp 1085-1097.LINK

    73. (2016) Mahesh S., Joshi S.C., 2016, Effect of Granule Sizes on Acoustic Properties of Protein-based Silica Aerogel composites via Novel Inferential Transmission Loss Method, Gels (MDPI), Mar 2016, 2(1), 11. LINK

    72. (2016) Nobeen N.S., Zhong Y.C., Bernad A.P.F., X. Ji, Elvin S.M. Chia, Joshi S.C., Zhong C., Constituent materials micro-damage modeling in predicting progressive failure of braided fibre composites, Composite Structures (Elsevier), Jun 2016, Vol 145, pp 194-202. LINK

    71. (2016) Zhong Y.C., Joshi S.C., Environmental durability of glass fiber epoxy composites filled with core–shell polymer particles, Materials and Design (Elsevier) Feb 2016, Vol. 92, pp 866–879. LINK

    70. (2016) Ganapathi A. S., Joshi S. C., Zhong C., Influence of cure kinetic, rheological and thermo-mechanical behavior on micro-level curing strain of an epoxy prepreg, Journal of Thermal Analysis and Calorimetry (Netherlands), Apr 2016, Vol 124, Issue 1, pp 305-316. LINK

    69. (2016) Ali M., Joshi S.C., Tailoring of Bonded Composite Scarf Joint Interface for Impact Damage Mitigation and Stiffness Compatibility, Plastics, Rubber and Composites: Macromolecular Engineering, Feb 2016, Vol. 45, Issue 2. LINK

    68. (2016) Ganapathi A. S., Joshi S. C., Zhong C., Flow-compacted deformations coupled with thermo-chemically-induced distortions in manufacturing of thick unidirectional CFRP composites, Journal of Composite Materials (Elsevier), Oct 2016 Vol. 50, No. 24, pp 3325-3343. LINK

    67. (2015) Joshi S. C. , Sheikh A. A., 3D printing in aerospace and its long-term sustainability, Virtual and Physical Prototyping, Vol 10, Issue 4, Nov 2015, pp 175-185. LINK

    66. (2015) Zhong Y.C., Joshi S. C., Response of hygrothermally aged GLARE 4A laminates under static and cyclic loadings, Materials and Design (Elsevier), Vol 87, Dec 2015, PP 138–148. LINK

    65. (2015) Bhudolia S.K., Perrotey P., Joshi S.C., Experimental investigation on suitability of carbon fibre thin C-plies for racquets, Journal of Sports Engineering and Technology, Aug 2015. LINK

    64. (2015) Mahesh S., Joshi S. C., Thermal Conductivity Variations with Composition of Gelatin-Silica Aerogel - Sodium Dodecyl Sulfate with Functionalized Multi-Walled Carbon Nanotube doping in Their Composites, International Journal of Heat and Mass Transfer,(Elsevier), 2015, Vol 87, Aug 2015, PP 606–615. LINK

    63. (2015) X. Ji, C. Wang, B. A. P. Francis, E. S. M. Chia, L. Zheng, J. Yang, S. C. Joshi, Z. Chen, Mechanical and interfacial properties characterisation of single carbon fibres for composite applications, Experimental Mechanics (Springer), July 2015, Vol 55, Issue 6, pp 1057-1065. LINK

    62. (2015) Zhong Y.C., Joshi S.C., Improved Impact Response of Hygrothermally Conditioned Carbon/Epoxy Woven Composites, Science and Engineering of Composite Materials, Apr 2015. LINK

    61. (2015) Zhong Y.C., Joshi S.C., Impact behavior and damage characteristics of hygrothermally conditioned carbon epoxy composite laminates, Materials and Design (Elsevier), Jan 2015, Vol. 65, pp 254–264. LINK

    60. (2015) Bhudolia S.K., S. Fischer, P.G. He, C.Y. Yue, S.C. Joshi, J.L. Yang, Design, manufacturing and testing of filament wound composite risers for marine and offshore applications, Advanced Composite Materials and Processes, Materials Science Forum Periodical (Trans Tech Publications, Switzerland), March 2015, Vol. 813, pp 337-343. LINK

    59. (2015) Yap C.W., Chai G.B., Song J., Joshi S.C., Upper and lower bound buckling load of perfect and delaminated fiber-reinforced composite columns, Composite Structures (Elsevier), Apr 2015, Vol. 122, pp 376–389. LINK

    58. (2015) Zhong Y.C. and Joshi S. C., Impact resistance of hygrothermally conditioned composite laminates with different lay-ups, Journal of Composite Materials (Elsevier), Vol. 813 (2015) pp 337-343. LINK

    57. (2014) Mahesh S., Joshi S. C., High Strain Recovery with Improved Mechanical Properties of Gelatin-Silica Aerogel Composites Post Binding Treatment, Journal of Materials Science (Springer), Jan 2014, Vol. 49, Issue 1, pp 163-179. LINK

    56. (2014) Joshi S.C., Bhudolia S.K., Microwave–thermal technique for energy and time efficient curing of carbon fiber reinforced polymer prepreg composites, Journal of Composite Materials (Elsevier), Oct  Oct 2014 vol. 48 no. 24, PP 3035-3048. LINK1 LINK2

    55. (2013) Guo W.J., Zhao L.P., Tong C.S., Chen I.M., Joshi S.C., Adaptive centroid-finding algorithm for freeform surface measurements, Applied Optics (The Optical Society), Vol. 52, No. 10, Apr 2015, pp D75-D83. LINK

    54. (2013) Ali M., Joshi S.C., Damage Evolution in Glass/Epoxy Composites Engineered using Core Shell Microparticles under Impact Loading, Journal of Materials Science (Springer), Dec 2013, Vol. 48, Issue 24, pp 8354-8367 LINK

    53. (2013) Ganapathi A. S., Joshi S.C., Zhong C., Bleeder Thickness Optimization for Controlling Resin Content in Thick Laminated Composites, Advanced Materials Research (Trans Tech Publications, Switzerland) Vol. 740, pp 698-703. LINK

    52. (2013) Ji X., Khatri A.M., Elvin S.M. Chia, Ryan K.H. Cha, Bern T.B. Yeo, Joshi S.C., Zhong C., Multi-scale Simulation and FE-Assisted Computation of Elastic Properties of Braided Textile Reinforced Composites, Journal of Composite Materials (Elsevier), April 2014, Vol. 48 No. 8, PP 931-949. LINK

    51. (2013) Ganapathi A. S., Joshi S.C., Zhong C., Simulation of Bleeder Flow and Curing of Thick Composites with Pressure and Temperature-Dependant Properties, Simulation Modelling Practice and Theory (Elsevier), Vol. 32, Mar 2013, pp 64–82. LINK

    50. (2013) Ali M., Joshi S.C., Energy Absorption Characteristics of Interface Modified GFRP Laminates under Low Velocity Impact, Advanced Materials Research (Trans Tech Publications, Switzerland) Vol. 626, pp 589-593. LINK

    49. (2013) Joshi S.C., A. Dineshkumar, Heat transfer efficiency of aluminium substrates with embedded semi-active thermal control device, Heat Transfer Engineering - an International Journal (Taylor & Francis, United States), Accepted for special issue Vol. 34, No.11-12. LINK

    48. (2012) Ali M., Joshi S.C., Impact damage resistance of CFRP prepreg laminates with dispersed CSP particles into ply interfaces, International Journal of Damage Mechanics (Elsevier), Dec 2011, Vol. 21 No 8, Nov 2012, pp 1106-1127. LINK

    47. (2012) Joshi S.C., Dikshit V., Enhancing interlaminar fracture characteristics of woven CFRP prepreg Composites through CNT dispersion, Journal of Composite Materials (Elsevier), Mar 2012 Vol. 46 No. 6, pp 665-675. LINK

    46. (2011) Joshi S.C. Sol-Gel Behavior of Hydroxypropyl Methylcellulose (HPMC) in Ionic Media Including Drug Release, contributed to Materials 2011, 4, 1861-1905. LINK to DOWNLOAD

    45. (2011) Joshi S.C., Toh W., Elastic properties of CNT-engineered polymer composites using multi-level mechanics approach, Journal of Multiscale Modelling (World Scientific), Vol. 3, No.4, 271-289. LINK

    44. (2011) Joshi S.C., Outgassing studies on thermal control coatings for micro-satellites, Aircraft Engineering and Aerospace Technology: an International Journal (Emerald Group Publishing), Vol. 83, Issue 2, pp.69-74. LINK

    43. (2011) Joshi S.C., Chen X., Time-variant simulation of multi-material thermal pultrusion, Applied Composite Materials (Wiley-VCH) Vol. 18, pp 283-296. LINK

    42. (2011) Joshi, S.C., Ng, H.W., Optimizing functionally graded Nickel-Zirconia coating profiles for thermal stress relaxation, Simulation Modelling Practice and Theory (Elsevier), Vol. 19, No. 1, pp. 586-598. LINK

    41. (2010) Jin Z., Joshi S.C., Jose N.G.J., Chan P.K. Ying T.M., Goh C.H., Data analysis and correlation for thermal balance test on a micro-satellite model, Heat Transfer Engineering - an International Journal (Taylor & Francis, United States), Vol. 31, No. 3, pp. 222-233. LINK

    40. (2010) Joshi, S.C., Reducing loss of resin flowing in porous fibrous media in simulation of composites fabrication, Polymer Composites (USA), Vol. 31, No. 2, pp 226-235. LINK

    39. (2010) Wang Z.Y., Lam Y.C., Joshi S.C., Chen X., Determination of pressure drop for concentrated suspension, Polymer Composites (USA), Vol. 31, No. 5, pp. 792-798. LINK

    38. (2010) Wang Z.Y., Lam Y.C., Chen X., Joshi S.C., Viscosity corrections for concentrated suspension in capillary flow with wall slip, AIChE journal (American Institute of Chemical Engineers Journal, USA), Vol. 56, No. 6, pp. 1447-1455. LINK

    37. (2009) Joshi S.C., Chen B., Influence of surfactant properties on thermal behaviour and sol-gel transitions in surfactant-HPMC mixtures, Journal of Applied Polymer Science (Wiley Periodicals, USA), Vol. 113, No. 5, pp 2887-2893. LINK

    36. (2009) Joshi S.C., Pragmatism in semi-steady modular finite-grid simulation methodology for aerospace composites, Simulation Modelling Practice and Theory (Elsevier), Vol. 17, No. 5, pp. 839-849. LINK

    35. (2009) Wang Z.Y., Joshi S.C., Lam Y.C., Chen X., End pressure corrections in capillary rheometry of concentrated suspensions, Journal of Applied Polymer Science (Wiley Periodicals, USA), Vol. 114, No. 3, pp. 1738-1745. LINK

    34. (2009) Yeo L.P., Joshi S.C., Lam Y.C., Chan-Park Mary B., Hardt D.E., Numerical analyses of peel demolding for UV embossing of high aspect ratio micro-patterning, Microsystem Technologies (Micro- and Nanosystems- information storage and processing systems), Vol. 15, No. 4, pp. 581-593. LINK

    33. (2009) Chen B., Joshi S.C., Lam Y.C., Bio-fluid uptake and release of Indomethacin drug of direct-compressed HPMC tablets, Carbohydrate Polymers (Elsevier, UK), Vol. 75, No. 2, pp. 282-286. LINK

    32. (2008) Joshi S.C., Liang C.M., Lam Y.C., Effect of solvent state and isothermal conditions on gelation of MC hydrogels, Journal of Biomaterials Science-Polymer Edition, Vol. 19, No. 12, pp. 1611-1623. LINK

    31. (2008) Joshi S.C., Chen B., Lam Y.C., Modelling leading to water entrapment point in thermally driven hydrogelation of methyl cellulose, e-polymer, Article No. 101, pp. 1-12. LINK

    30. (2008) Su J.C., Liu S.Q. , Joshi S.C., Lam Y.C., Effect of SDS on the gelation of Hydroxypropylmethylcellulose hydrogels, Journal of Thermal Analysis and Calorimetry (Netherlands), Vol. 93, No. 2, pp. 495-501. LINK

    29. (2008) Liu S.Q., Joshi S. C., Lam Y.C., Effects of salts in Hofmeister series and solvent isotopes on gelation mechanisms for Hydroxypropylmethylcellulose hydrogel, Journal of Applied Polymer Science (Wiley Periodicals, USA), Vol. 109, No. 1, pp. 363-372. LINK

    28. (2008) Liu S.Q., Joshi S.C., Lam Y.C., Tam K.C., Thermoreversible gelation of Hydroxypropylmethylcellulose in simulated body fluids, Carbohydrate Polymers (Elsevier, UK), Vol. 72, No. 1, pp. 133-143. LINK

    27. (2008) Jose N.G.J., Joshi S.C., Jin Z.., Chan P.K., Lee S.C., Design and development of thermal test model of a micro-satellite for thermal balance test, Aircraft Engineering and Aerospace Technology: an International Journal (Emerald Group Publishing), Vol. 80, Issue 1, pp. 51-58. LINK

    26. (2008) Joshi S.C., Su J.C., Liang C.M., Lam Y.C., Gelation of Methylcellulose hydrogels under isothermal conditions, Journal of Applied Polymer Science (Wiley Periodicals, USA), Vol. 107, No. 4, pp. 2101-2108. LINK

    25. (2007) Lam Y.C., Wang Z.Y., Chen X., Joshi S.C., Wall slip of concentrated suspension melts in capillary flows, Powder Technology (Elsevier, Switzerland), Vol. 177, pp. 162-16. LINK

    24. (2007) Lam Y.C., Joshi S.C., Tan B.K., Thermodynamic characteristics of gelation for Methyl-Cellulose hydrogels, Journal of Thermal Analysis and Calorimetry (Netherlands), Vol. 87, No. 2, pp. 475-482. LINK

    23. (2006) Li R.M., Joshi S.C., Ng H.W., Radiation properties modelling for plasma-sprayed alumina-coated rough surfaces for spacecrafts, Journal of Materials Science and Engineering B: Solid-State Materials for Advanced Technology (Switzerland), Vol. B132, pp. 209-214. LINK

    22. (2006) Jin Z., Joshi S.C., Thermal control schemes for a micro-satellite with all-active and selectively-active solar string designs, Heat Transfer Engineering - an International Journal (Taylor & Francis, United States), Vol. 27, No. 10, pp. 80-89. LINK

    21. (2006) Joshi S.C., Lam Y.C., Modelling heat and degree of gelation for Methylcellulose hydrogels with NaCl additives, Journal of Applied Polymer Science (Wiley Periodicals, USA), Vol. 101, pp. 1620-1629. LINK

    20. (2006) Joshi S.C., Butler D.L., Kah W.Y., Teo S.K., Cure characterization of TECHNOVIT 3040 for micro level surface replication, Materials Research Innovations (Germany), Vol. 10, No. 2, pp. 268-274. LINK

    19. (2006) Joshi S.C., Lam Y.C., Integrated approach for modelling cure and crystallization kinetics of different polymers in 3D pultrusion simulation, Journal of Materials Processing Technology (Netherlands), Vol. 174, Issues 1-3, pp. 178-182. LINK

    18. (2005) Yeo L.P., Lam Y.C., Chan B.E. Mary, Joshi S.C., Hardt D.E., Demolding of high aspect ratio polymeric micro-patterning, International Journal of Nanoscience, Vol. 4, Issue 4, pp. 543-549. LINK

    17. (2005) Li R. M., Joshi S. C., Ng H. W., Characterization of plasma sprayed alumina as thermal coating for micro-satellite applications, Journal of Materials: Design and Applications, (Proceedings IMechE UK), Vol. 219, Part L, pp. 111-119. LINK

    16. (2005) Chan-Park M.B., Lam Y.C., Laulia P., Joshi S.C., Simulation and investigation of factors affecting high aspect ratio UV embossing, Langmuir (American Chemical Society, Washington DC, USA) Vol. 21, No. 5, pp. 2000-2007. LINK

    15. (2005) Yong S.Y., Joshi S.C., Development of reaction wheels housing for micro-satellites, Aircraft Engineering and Aerospace Technology: an International Journal (Emerald Group Publishing), Vol. 77, No. 2, pp. 114-121. LINK

    14. (2004) Yue C.Y., Lam Y.C., Yang Y.X., Joshi S.C., Tam K.C., Hu X., Factors governing in-situ fibre formation in LCP/PC blends, Composites Part A - Applied Science and Manufacturing (Elsevier, UK), Vol. 35, pp. 1033-1038. LINK

    13. (2004) Feroz Ahmed, Joshi S.C., Lam Y.C., Three-dimensional FE/NCV modelling of thermoplastic composites pultrusion, Journal of Thermoplastic Composite Materials (SAGE Publications, USA), Vol. 17, pp. 447-462. LINK

    12. (2003) Tan L.P., Joshi S.C., Yue C.Y., Lam Y.C., Hu X., Tam K.C., Effect of shear heating during injection molding on the morphology of PC/LCP blends, ACTA Materialia (Elsevier, UK), Vol. 51, Issue 20, pp. 6269-6276. LINK

    11. (2003) Joshi S.C., Lam Y.C., Yue C.Y., Tam K.C., Li L., Hu X., Energy-based predictive criterion for LCP fibrillation in LCP/Thermoplastic polymer blends under shear, Journal of Applied Polymer Science (Wiley Periodicals, USA), Vol. 90, No. 12, pp. 3314-3324. LINK

    10. (2003) Joshi S.C., Lam Y.C., Tun U.W., Improved cure optimization in pultrusion with pre-heating and die-cooler temperature, Composites Part A - Applied Science and Manufacturing (Elsevier, UK), Vol. 34, Issue 12, pp. 1151-1159. LINK

    9. (2003) Lam Y.C., Li J.H., Joshi S.C., Simultaneous optimization of die-heating and pull-speed in pultrusion of thermosetting composites, Polymer Composites (USA), Vol. 24, No. 1, pp. 199-209. LINK

    8. (2002) Joshi S.C., Lam Y.C., Boey F.Y.C. and Tok A.I.Y., Power law fluids and bingham plastics flow models for ceramic tape casting, Journal of Materials Processing Technology (UK), Vol. 120, Nos. 1-3, pp. 215-22. LINK

    7. (2002) Li J.H., Joshi S.C., Lam Y.C., Curing optimization for pultruded composite sections, Composites Science and Technology (UK), Vol. 62, No. 3, pp. 457-467. LINK

    6. (2001) Joshi S.C., Lam Y.C., Three-dimensional FE/NCV simulation of pultrusion process with temperature-dependent material properties including resin shrinkage, Composites Science and Technology (UK), Vol. 61, No. 11, pp. 1539-1547. LINK

    5. (2000) Joshi S.C., Lam Y.C., Mass conservation in numerical simulation of resin flow, Composites Part A - Applied Science and Manufacturing (UK), Vol. 31, No. 10, pp. 1061-1068. LINK

    4. (2000) Lam Y.C., Joshi S.C., Liu X.L., Numerical simulation of mould filling process in resin transfer moulding, Composites Science and Technology (UK), Vol. 60, No. 6, pp. 845-855. LINK

    3. (2000) Joshi S.C., Lam Y.C., Modelling the effects of resin shrinkage in pultrusion of composites sections, Advanced Composites Letters (UK), Vol. 9, No. 6, pp. 385-395. LINK

    2. (1999) Joshi S.C., Liu X.L., Lam Y.C., A numerical approach for modelling of polymer curing in fibre reinforced composites, Composites Science and Technology (UK), Vol. 59, No. 7, pp. 1003-1013. LINK

    1. (1999) Joshi S.C., Liu X.L., Lam Y.C., Sheridan J., Simulation of resin film infusion process using finite element/nodal control volume approach, Advanced Composites Letters (UK), Vol. 8, No. 3, pp. 101-104. LINK

    Local

    1. Tan B.L., Nagarajan N., Joshi S.C., Tan S.H., Arichandran K., 2002, Orbit choice and solar panel configurations and their impact on power generation for X-Sat, Electrical & Electronic Engineering Research, pp. 34 - 35.

  • Conference Publications

    (Find a permitted copy of some papers HERE)

    89. Dikshit Vishwesh, SK Bhudolia, Sunil C Joshi, Progressive Fabrication Procedure for Manufacturing Multiscale Composites using Functionalized CNTs, 9th International Conference on Materials for Advanced Technologies, Singapore, June 2017.

    88. M Mubarak Ali and Sunil C Joshi, Optimal layup schemes with selective dispersion of Core/ shell microparticles in ply interfaces of glass/epoxy composite laminates for low velocity impact, Journal of Physics: Conference Series (International Conference on Aerospace and Mechanical Engineering, India, Dec 2018)

    87. Yi Di Boon, Sunil C Joshi, Consolidation of Fiber Reinforced Thermoplastic Composites Fabricated Using Commingled Fibers Filament Winding, 16th Pacific Polymer Conference, PPC16-A-08878, Dec 2019, SUNTEC Singapore Convention &Exhibition Centre.

    86. P Manikandan, Sunil C Joshi, Armando Pinter, Fabio Angiolini, Design optimization of composite tail structure for helicopters, International Conference on Materials for Advanced Technologies 2019 (ICMAT), Singapore Sym DD-01, Monday, 24/Jun/2019, 1:30pm - 3:30pm.

    85. Eldho Mathew, Sunil C Joshi, Challenges and Merits of Automated Fibre Placement for Manufacturing of Advanced Composites, International Conference on Materials for Advanced Technologies 2019 (ICMAT), Singapore, Sym DD-04, 25/Jun/19, 1:30pm - 3:30pm.

    84. SK Bhudolia, Sunil C Joshi,, Anthony Bert, Goram R Gohel, Raama Makam, Performance of Composite Bike Frames Manufactured Using Bladder Resin Transfer Moulding Process, International Conference on Materials for Advanced Technologies 2019 (ICMAT), Singapore Sym DD-04, 25/Jun/19, 1:30pm - 3:30pm.

    83. P Manikandan, Sunil C Joshi, Armando Pinter, Thermo-mechanical instability characteristics of laminated composite cylindrical shells, International Conference on Materials for Advanced Technologies 2017 (ICMAT), Singapore Procedia Engineering 214 (2017) 76–85.

    82. Abdullah Sheikh, Sunil C. Joshi, Optimizing Satellite Structures Design for Additive Manufacturing, Aerospace Technology Seminar 22 Mar 2017, Singapore.

    81. SK Bhudolia, P Perrotey, Sunil C Joshi, Effect of Stitches on out-of-plane response of Non-Crimp Carbon Fabric Composites, Aerospace Technology Seminar 22 Mar 2017, Singapore.

    80. Eldho Mathew, Abdullah A. Sheikh, Sunil C. Joshi, Assessing Improvements in Toughness of GFRP Laminates by Interleaving Thermoplastic Films, Aerospace Technology Seminar 22 Mar 2017, Singapore.

    79. Abhishek P.H., Ganapathi A.S., Sunil C Joshi, Aerogel-Core Carbon Composites For Sports Applications And Their Response To Compressive Loading, 2nd International Conference in Sports Science & Technology 2016 (ICSST 2016), 12-13 Dec 2016, NEC, Singapore.

    78. SK Bhudolia, Kenneth K K Chong, Sunil C Joshi, Vibration and Impact Performance of Hybrid Composites for Sports Applications, 2nd International Conference in Sports Science & Technology 2016 (ICSST 2016), 12-13 Dec 2016, NEC, Singapore.

    77. SK Bhudolia, Pavel Perrotey, Sunil C Joshi, C-PLY™ /ELIUM® Composites with Improved Energy Absorption and Vibration Damping for Racquets, 2nd International Conference in Sports Science & Technology 2016 (ICSST 2016), 12-13 Dec 2016, NEC, Singapore.

    76. Y. D. Boon, S. C. Joshi and L. S. Ong, Effects of Mechanical Surface Treatment on Bonding between Aluminum and Carbon/Epoxy Composites, Advances in Materials & Processing Technologies Conference, Nov 2016, Kuala Lumpur, Malaysia, Procedia Engineering, Vol. 184, pp 552-559.

    75. S. C. Joshi, A.A. Sheikh, Changing Paradigm in Satellite Design, Development and Assembly with 3D Printing, Satellite 2016, Berlin, July 21-23, 2016, Germany.

    74. Gour Govind, S. C. Joshi, Characteristics of hypervelocity impact of Micro-particles on multi-foils shield configurations, Satellite 2016, Berlin, July 21-23, 2016, Germany.

    73. SK Bhudolia, P Perrotey, SC Joshi, Mechanical performance of novel thin ply thermoplastic composites, 5th World Congress on Materials Science & Engineering, June 13-15, 2016, Alicante, Spain.

    72. A. S. Ganapathi, S. C. Joshi, Aerogel Core CFRP Curved Sandwich Composites with Variable Cross-Section without Ply-Drop for Body Protection and Rehabilitation, SAMPE Long Beach, Long Beach Convention Center, California, May 23-26, 2016, USA.

    71. Phillip Keane, Chua C.K., Joshi S.C., Embedding Electronics in Printing ULTEM 9085 Quadcopter, 2nd International Conference on Progress in Additive Manufacturing (Pro-AM 2016) 16-19 May 2016, Singapore.

    70. S.K. Bhudolia, Pavel Perrotey, Joshi S.C., Innovative Thin Ply Thermoplastic Composites for improved ILFT Properties, Singapore Aerospace Technology and Engineering Conference (SATEC), Feb 15, 2016, Singapore.

    69. Phillip Keane, Chua C.K., Joshi S.C., Qualification of Additively Manufactured Thermoplastics for Aviation and Space Applications, Singapore Aerospace Technology and Engineering Conference (SATEC), Feb 15, 2016, Singapore.

    68. A. S. Ganapathi, Sunil C. Joshi, Integrated Analysis of Compaction, Edge Distortion and Residual Deformation of Wind-Turbine Thick Composites Spar-Cap, 20th International Conference on Composite Materials, Copenhagen, 19-24 July 2015, Denmark.

    67. Mahesh Sachithanadam, Joshi S.C., Influence of Granule Size on Thermal Characteristics of Protein Based Silica-Aerogel Composites, 18th International Conference on Composite Structures, Lisbon, 15-18 Jun 2015, Portugal.

    66. Nadeesh Singh Nobeen, Yucheng Zhong, Elvin S. M. Chia, Sunil C. Joshi, Zhong Chen, Constituent materials micro-damage modeling in predicting progressive failure of braided fibre composites, 18th International Conference on Composite Structures, Lisbon, 15-18 Jun 2015, Portugal.

    65. Mahesh Sachithanadam, Joshi S.C., High Compressibility with Superior Thermal Insulation of Super-hydrophilic Silica Aerogel Composites, Aerospace Technology Seminar 2 Apr 2015, Singapore.

    64. A. Dineshkumar, Abdullah Sheikh, Sunil C. Joshi, Pushing Heat Shielding Boundaries for Sandwich Composites with Aerogels and Coatings, Aerospace Technology Seminar 2 Apr 2015, Singapore.

    63. S.C. Joshi, S.K. Bhudolia, A. Dineshkumar, M.Upadhyayula, S. Satheesh Kumar, Static Testing of Non-jettisonable Fighter Aircraft Pylon for Estimating Load Coefficients, Aerospace Technology Seminar 2 Apr 2015, Singapore.

    62. Somen K Bhudolia, Pavel Perrotey, Sunil C Joshi, Experimental Investigation On Suitability Of Carbon Fibre Thin Plies Composites For Racquets, 1st International Conference in Sports Science & Technology 2014 (ICSST 2014), 11-12 Dec 2014, Novatel, Singapore.

    61. Pavel Perrotey, Somen K Bhudolia, Sunil C Joshi, Optimizing VARI Manufacturing with Carbon NCFs for Sports Equipment, 1st International Conference in Sports Science & Technology 2014 (ICSST 2014), 11-12 Dec 2014, Novatel, Singapore.

    60. A. S. Ganapathi, Muneesh Maheshwari, Sunil C. Joshi, Zhong Chen, A. K. Asundi, Swee Chuan Tjin, Fibre Bragg grating sensors for in-situ measurement of resin pressure in curing composites, The International Conference on Experimental Mechanics (icEM2014), 15-17 Nov 2014, Holiday Inn Atrium, Singapore.

    59. S.K. Bhudolia, S. Fischer, P.G. He, C.Y. Yue, S.C. Joshi, J.L. Yang, Design, Manufacturing and Testing of Filament Wound Composite Risers for Marine and Offshore Applications, The First International Conference on Advanced Composites for Marine Engineering (ICACME2013) conference, "Advanced Materials Forum", 10-12 Sep, 2013, China International Exhibition Center, Beijing, China.

    58. Xianbai Ji, Bernad. A. P. Francis, Chen Wang, Elvin S.M. Chia, Sunil C. Joshi, Zhong Chen, Axial Mechanical Properties Of Carbon Fibers and Interfacial Strength Characterization, SAMPE Tech 2014 Conference, Jun 2-5, Seattle, WA, USA.

    57. Aditya M. Khatri, Xianbai Ji, Shee Ying Ong, Elvin S.M. Chia, Zhong Chen, Sunil C. Joshi, Representative Units Study for Performance-Controlling Features and Parameters in Braided Composites, SAMPE Tech 2014 Conference, Jun 2-5, Seattle, WA, USA.

    56. Joshi S.C., S.K. Bhudolia, and Y.L. Yap, Experimental Characterization of Compressive Properties of Microwave Cured GFRP Prepreg Composities, Singapore Aerospace Technology and Engineering Conference (SATEC) Feb 10, 2014, Singapore. LINK

    55. Joshi S.C., Dikshit V. and Ali M., Fractography of Particle Strengthening Mechanisms at Interfaces in Prepreg Composites, 4th International Conference on Manufacturing Science & Technology 2013 (ICMST 2013), Dubai. LINK

    54. Mahesh Sachithanadam, Joshi S.C., A New Phenomenon of Compressive Strain Recovery in Gelatin-silica Aerogel Composites with SDS, International Conference on Materials for Advanced Technologies 2013 (ICMAT), 2013, Singapore. LINK

    53. Mahesh Sachithanadam, Joshi S.C., Brittle to Ductile Transitions in Silica Aerogel Behaviour with Post Synthesis Binding Treatment, International Conference on Materials for Advanced Technologies 2013 (ICMAT), 2013, Singapore.

    52. Zhong Y.C., Joshi S.C., Low-velocity Impact Testing of Hygrothermally Conditioned CFRP Laminates, International Conference on Textile Composites, Materials and Engineering (ICTCME 2013), New York, USA, June 5-6, 2013.

    51. Ali M., Joshi S.C., Low Velocity Impact Analysis of Glass/Phenolic Prepreg Laminates Engineered with Core Shell Microparticles, 4th International Conference on Recent Advances in Composite Materials (ICRACM 2013), Goa, India, Feb 18-21, 2013.

    50. Ganapathi A. S., Joshi S.C., Zhong C., Bleeder Thickness Optimization for Controlling Resin Content in Thick Laminated Composites, International Conference on Materials, Mechatronics and Automation (ICMMA 2013), Holiday Inn Singapore Atrium, Singapore, April 21-22, 2013.

    49. Xianbai Ji, Aditya M. Khatri, Elvin S.M. Chia, Ryan K.H. Cha, Bern T.B. Yeo, Sunil C. Joshi, Zhong Chen, CAD- and FEA- Assisted Computation of Elastic Properties and its Experimental Validation for Braided Composite Wing Structure, Aerospace Technology Seminar, Singapore, Mar 1, 2013.

    48. Sunil C. Joshi, S.K. Bhudolia, J. Girivilar and A. Dineshkumar, Strain Gauge Calibration of a Non-jettisonable Aircraft Pylon:  An analytical and Experimental Approach, Aerospace Technology Seminar, Singapore, Mar 1, 2013.

    47. Khatri A.M., Joshi S.C., A Shear-Inclusive Formulation for Transverse Poisson Ratio of Fibre Reinforced Composites and its FEA Validation, Annual Technical Conference (ANTEC Mumbai), Renaissance Mumbai Convention Centre Hotel, Mumbai, India, December 6-7, 2012.

    46. Ali M., Joshi S.C., Impact Perforation Characteristics of Glass/Epoxy Composite Laminates with Modified Ply Interfaces, 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2012), Hotel Fort Canning, Singapore,19 - 20 November 2012.

    45. Ali M., Joshi S.C., Energy Absorption Characteristics of Interface Modified GFRP Laminates under Low Velocity Impact, The International Conference on Advanced Material Engineering & Technology (ICAMET 2012), Penang, Malaysia, 28-30 November 2012.

    44. Xianbai Ji, Aditya M. Khatri, Elvin S.M. Chia, Ryan K.H. Cha, Bern T.B. Yeo, Sunil C. Joshi, Zhong Chen, Multi-scale modeling of variable angle braided textile composites and its validation, 1st Brazilian Conference on Composite Materials - BCCM1, Natal-RN, Brazil, July 16-19, 2012.

    43. Joshi S.C., Bhudolia S., An innovative microwave-thermal energy-efficient curing approach for CFRP composites, New Challenges in Aerospace Technology & Maintenance Conference (NCATMC), 2012, Singapore.

    42. Joshi S.C., Low velocity impact performance of aerogel-filled sandwich composites, 16th International Conference on Composite Structures, ICCS 16, A. J. M. Ferreira (Editor), June 28-30, 2011, Porto, Portugal. LINK

    41. Khatri A.M., Ji X-B, Joshi S.C., Chen Z., Textile tightening simulation in regular braided textile composites using dynamic unit cell models, International Conference on Materials for Advanced Technologies 2011 (ICMAT), 2011, Singapore.

    40. Ji X-B, Khatri A.M., Joshi S.C., Chen Z., A finite element approach to predict elastic properties of braided textile composites, International Conference on Materials for Advanced Technologies 2011 (ICMAT), 2011, Singapore.

    39. Joshi S.C., Interlayer strength improvement with CNT dispersion in woven CFRP laminates, ICCE-18, July 4-10, 2010, Anchorage, Alaska, USA.

    38. Joshi S.C., Xu K., Fabrication and thermal performance of aerogel-filled carbon composite sandwich structures, International Symposium on Innovative Materials for Processes in Energy Systems (IMPRES), 2010, Singapore. LINK

    37. Joshi S.C., A. Dineshkumar, Heat transfer efficiency of aluminium substrates with embedded semi-active thermal control device, International Symposium on Innovative Materials for Processes in Energy Systems (IMPRES), 2010, Singapore.

    36. Ali M., Joshi S.C., Recent developments in smart repairing polymer matrix composites, New Challenges in Aerospace Technology & Maintenance Conference (NCATMC), 2010, Singapore.

    35. Joshi S. C., Dikshit V., Carbon nanotubes as inter-ply strengtheners in woven carbon fabric prepreg composites, International Conference on Materials for Advanced Technologies 2009 (ICMAT), 2009, Singapore.

    34. Joshi S.C., Chen B., Swelling, Dissolution and Disintegration of HPMC in Aqueous Media, The 13th International Conference on Biomedical Engineering (ICBME), 2008, Singapore. LINK

    33. Joshi S.C., Dikshit V., Studies on CNT-Engineered Ply Interfaces in CFRP Prepreg Composites, 7th International Conference on Materials Processing for Properties and Performance, 2008, Singapore.

    32. Wang Z.Y., Joshi S.C., Chen B., Thermorheological investigation of Hydroxypropyl Methylcellulose aqueous solutions in the sol-gel transition, 7th International Conference on Materials Processing for Properties and Performance, 2008, Singapore.

    31. Yeo L.P., Lam Y.C., Chan-Park Mary B., Hardt D.E., Joshi S.C., High Aspect Ratio Rigid Nickel Mold Fabrication for UV Embossing of Polymeric Arrays, SMA International Conference 2008 & 5th International symposium on Nano manufacturing, 2008, Singapore.

    30. Joshi S.C., Lam Y.C., Kyaw Zaw, Optimization for Quality Thermosetting Composites Pultrudate Through Die Heater Layout and Power Control, 16th International Conference on Composite Materials, 8-13 Jul 2007, Kyoto, Japan, pp. 226557p1-226557p7.

    29. Joshi S.C., Liang C. M., Lam Y.C., Effect of Solvent State and Isothermal Conditions on Gelation of MC Hydrogels, International Conference on Materials for Advanced Technologies 2007, 1-6 Jul 2007, Singapore.

    28. Raman V., Abbas A., Joshi S.C., Mapping Local Cavitation Events in High Intensity Ultrasound Fields, COMSOL Users Conference 2006, Bangalore, 2007, India. LINK

    27. Jose N.G.J., Joshi S.C., Zhanli J., Chan P.K., Lee S.C., Design and Development of X-Sat Thermal Test Model for Thermal Balance Test,  Asian Space Conference (ASC) 2007, Mar 2007, Singapore.

    26. Joshi S.C., Lam Y.C., Tan B.K., Liu S.Q., Modeling of Thermal Gelation and Degelation of MC and HPMC Hydrogels, NTU-SGH Graduate Student Symposium, Dec 2006, Singapore, pp. 47-51.

    25. Joshi S.C., Lam Y.C., Simulation of Manufacturing Processes for Advanced Polymer Composites, The 5th International Conference on Materials Processing for Properties and Performance (5th MP3), Dec 2006, Singapore.

    24. Joshi S.C., Lam Y.C., Tan B.K., Liu S.Q., Modeling of Thermal Gelation and Degelation of MC and HPMC Hydrogels, International Conference on Biomedical and Pharmaceutical Engineering (ICBPE 2006) proceedings, Dec 2006, Singapore, pp. 545-550. LINK

    23. Joshi S.C., Chiang W.P. Troy, Characterization of Thermal Control Surface Coatings for Micro-satellites, The 3rd International Conference on Technological Advances of Thin Films & Surface Coatings (Thin Films 2006), Dec 2006, Singapore.

    22. Li R.M., Joshi S.C., Ng H.W., Radiative Properties Modelling for Plasma-Sprayed-Alumina-Coated Rough Surfaces for Spacecrafts, 3rd International Conference on Materials for Advanced Technologies (ICMAT2005); Symposium W: Advanced Materials and Polymers for Defense & Aerospace Applications, Jul 2005, Singapore.

    21. Joshi S.C., Butler D.L., Kah W.Y., Teo S.K., Cure Characterization of Technovit 3040 for Micro Level Surface Replication, 3rd International Conference on Materials for Advanced Technologies (ICMAT2005); Symposium U: POLYCHAR - 13 Annual World Forum on Advanced Materials, Jul 2005, Singapore.

    20. Li R.M., Joshi S.C., Ng H.W., FE Simulation of in-Service Thermal Behaviour of Plasma Sprayed Alumina Coated Satellite Substrates, The 4th Australian Congress on Applied Mechanics (ACAM2005), Feb 2005, Australia.

    19. Zhanli J., Joshi S.C., Nagarajan N., Fan S.C. et al., Challenges in Meeting Thermal, Structural and Power Requirements for X-Sat, 1st Asian Space Conference, Nov 2004, Thailand.

    18. Yeo L.P., Lam Y.C., Chan B.E. Mary, Joshi S.C., Hardt D.E., Demolding of High Aspect Ratio Polymeric Micro-patterning, The 1st International Conference on Nanotechnology, Jul 2004, Singapore.

    17. Joshi S.C., Lam Y.C., Li L., Development of a Gelation Model for Methyl Cellulose Hydrogels, Annual Technical Conference 2004 (ANTEC 2004), May 16-20 2004, pp. 2479 – 2483, Chicago, United States. LINK

    16. Li R.M., Joshi S.C., Ng H.W., Suitability of Plasma Sprayed Alumina as Thermal Control Coatings for Micro-satellites, 2nd International Conference on Materials for Advanced technologies, 2003, Singapore.

    15. Joshi S.C., Lam Y.C., Modelling of Cure and Crystallization Kinetics of Polymers in Pultrusion Simulation, 2nd International Conference on Materials for Advanced Technologies, 2003, Singapore.

    14. Chan-Park Mary, Lam Y. C., P. Laulia, Joshi S. C., FEM Simulation of High Aspect Ratio UV Embossing, 2nd international conference on materials for advanced technologies & IUMRS – International conference in Asia 2003, 8 – 12 Dec 2003, Singapore.

    13. Joshi S.C., Nagarajan N., Arichandran K., Star-Tracker Mounting Analysis for X-Sat Micro-satellite Mission, Cooperative Research Centre for Satellite Systems (CRCSS) Conference 2003, Feb 2003, Australia.

    12. Nagarajan N., Chua T.W., Thimothy K.I., Lim S.L. Sharon, Tan B. L., Sindhwani M., Joshi S.C., Satellite Bus Development for X-Sat Micro-satellite Mission, Cooperative Research Centre for Satellite Systems (CRCSS) Conference, Feb 2003, Australia.

    11. Feroz Ahmed, Joshi S.C., Lam Y.C., Three-dimensional Simulation of Heat and Mass Transfer in Thermoplastic Pultrusion, First International Conference on Materials Processing for Properties and Performance (MP3), Singapore, Aug 2002, Paper id. MP3 – 165, pp. 621-636.

    10. Joshi S.C., Tun U.W., Lam Y.C., Effect of Pre-heating and Die-cooler Temperature on Cure Optimization in Pultrusion, First International Conference on Materials Processing for Properties and Performance (MP3), Singapore, Aug 2002, Paper id. MP3 – 150, pp. 646-658.

    9. Yue C.Y., Lam Y.C., Yang Y.X., Joshi S.C., Tam K.C., Hu X., Factors Governing in-situ Fibre Formation in LCP/PC Blends, ACUN-4, “Composite Systems – Macrocomposites, Microcomposites, Nanocomposites”, Australia, Jul 2002.

    8. Li J.H., Joshi S.C., Lam Y.C., Optimization of Die Heating for Pultrusion Processes, 13th International Conference on Composite Materials (ICCM-13), China, Jun 2001, Paper id. 1040, pp. 1-10. LINK

    7. Joshi S.C., Lam Y.C., Field Analysis and Modeling of Fibre Reinforced Polymer Composites Manufacturing, Processing and Fabrication of Advanced Materials (PFAM VIII), Singapore, Sep 1999, pp. 1005-1013.

    6. Lam Y.C., Joshi S.C., Liu X.L., Application of a General-purpose Finite Element Package for Numerical Modelling of Resin Flow through Fibrous Media, International Conference on Advances in Materials and Processing Technologies, Malaysia, Aug 1998, pp. 926-933.

    5. Joshi S.C., Liu X.L., Lam Y.C., A Three Zone Approach to Numerical Simulation of Resin Film Infusion Process, International Conference on Composites Engineering (ICCE-5), United States, 1998, pp. 437-438.

    4. Joshi S.C., Liu X.L., Lam Y.C., Numerical Modelling of Resin Cure Using a General Purpose FE Package, International Conference on Composite Materials (ICCM-11), Australia, Jul 1997, pp. 2752-2762. LINK

    3. Joshi S.C., Bathgate R.G., Janardhana M.N., Effect of Thermal and Mechanical Loading on Adhesively Bonded CFRP-Aluminium Flush Joints, The First Australian Congress on Applied Mechanics (ACAM-96), Australia, Feb 1996.

    2. Joshi S.C., Rao M.S., Preliminary Analysis and Design of a Patch for Damaged Monolithic Panels, Seminar on Science and Technology of Composites, Adhesives and Sealants, Sep 1989, India, pp. 349-356.

    1. Joshi S.C., Fracture Mechanics Approach to Delamination Problem, Indian Society of Theoretical and Applied Mechanics (32 Congress of ISTAM), India, Dec 1987.

  • Reports

    2. Aerogel-Filled Sandwich Composites for Thermal Radiation and Acoustic Barrier Applications.

    1. F-16 External Fuel Tank Pylon Strain Gauge Re-calibration Capability Development.

Keywords

Aerogel

Sandwich Composites

Thermal Control

RFIP

Satellite

Impact

Aircraft Pylon

 

Publications update: Jul 2020

Copyrights @ A/P Sunil Chandrakant Joshi. All rights reserved